Max Security Max-G Pro 4 Especificaciones descargar pdf (Pagina 7)

MatchPort b/g Pro Integration Guide 7

2: Description and Specifications

The MatchPort b/g Pro embedded device server is a complete network-enabling solution

on a 1.75"x1.75" PCB. This miniature device server empowers original equipment

manufacturers (OEMs) to go to market quickly and easily with networking and web page

serving capabilities built into their products.

The MatchPort b/g Pro has the following features:

 Power Supply: Single regulated 3.3V input required. On board step down

conversion. LC filtering to minimize noises and emissions on all supply lines.

 Controller: A Lantronix DSTni-FX 32-bit microprocessor, running at 166 MHz

internal bus and 83 MHz external bus.

 Memory: 64 Mbits Flash and 64 Mbits SDRAM.

 Wireless LAN: 802.11bg compliant radio with U.FL connector for external

antenna. 802.11i and 802.1X security standards supported.

 Ethernet: 10/100 Base TX with auto-negotiation and HP auto-MDIX. On- board

100-ohm terminations included. External RJ45 jack and 1:1 Ethernet magnetics

with a minimal numbers of discrete components required.

 Network interface status indication: On board WLAN and Ethernet LED

drivers.

 Serial Ports: Two full duplex serial ports with hardware flow control and modem

control handshaking signals. Standard or customized baud rates up to 230 Kbps.

External level shifters for RS232. Port 1 can also be configured to drive RS422 or

RS485 level shifters.

 Configurable IO Pins (CPs): Up to 7 pins are configurable as general purpose

I/Os.

 Interface Signals: 3.3V-level interface signals.

 Temperature Range: Operates over an extended temperature range.

MatchPort b/g Pro Block Diagram

The following drawing is a block diagram of the MatchPort b/g Pro showing the

relationships of the components.

1 2 3 4 5 6 7 8 9 10 11 12 ... 32 33

Sin comentarios

Max Security Max-G Pro 4 Especificaciones Pagina 7